No products in the cart.
B43M Juiced
USD 150.00 USD 300.00Price range: USD 150.00 through USD 300.00
The B43M Juiced delivers a smooth, focused neck tone and a hotter, punchier bridge with tight lows, strong mids, and clear attack. A powerful mini humbucker set built to push harder without losing the clarity, definition, and response of the BTone® sound.
- Description
- Demo Videos
- Live Videos
- Tech Specs
- Reviews
- Dimensions
- Wiring Diagrams
- 4-Conductor Wiring
- The Story
- Additional information
B43M Juiced — More Punch, More Focus, More Drive
The B43M Juiced is a calibrated mini humbucker set built for players who want more output, stronger mids, and a tighter, more aggressive response without losing the clarity and focus that define a mini humbucker.
Wound with 42 AWG plain-enamel wire and powered by ceramic bar magnets, the Juiced set delivers a fast attack, tight low end, focused midrange, and clear note separation under gain.
The tighter voice of a mini humbucker with more output, more punch, and more authority.
Neck
≈ 7.5 kΩ
Smooth, focused, and clear with added strength.
- Tight, controlled low end
- Strong midrange presence
- Clear highs with good note separation
Ideal for blues, rock, driven rhythm work, and lead tones that need warmth without becoming muddy.
Bridge
≈ 8.5 kΩ
The hotter, harder-hitting side of the set.
- Tight, punchy low end
- Forward mids with a fast attack
- Clear top end that stays defined under gain
Built to push an amp harder while retaining the tighter response and articulation of a mini humbucker.
Who It’s For
✓ Players who want more output and punch from a mini humbucker
✓ Great for blues, classic rock, hard rock, alternative, and heavier styles
✓ Players who want tight lows and clear note separation under gain
✕ Not ideal for players seeking a very soft, low-output vintage mini humbucker response
Key Benefits
- Higher output with a fast, responsive attack
- Tight low end and focused midrange
- Clear note separation under gain
- Lightly offset coils for added harmonic complexity
- Calibrated neck and hotter bridge for natural output balance
- More drive without losing mini humbucker definition
Construction
Hand-wound in Canada with ceramic bar magnets, 42 AWG plain-enamel wire, and lightly offset coils. Wax-potted for stability, consistency, and feedback control.
Configuration
Neck Pickup
Approx. DCR: 7.5 kΩ
Slug Coil: North Up • CCW
Screw Coil: South Up • CW
Bridge Pickup
Approx. DCR: 8.5 kΩ
Slug Coil: North Up • CCW
Screw Coil: South Up • CW
Wire: 42 AWG Plain Enamel
Magnets: Ceramic Bar
Recommended Pots: 500 kΩ
Tone Cap: 0.022 µF
Includes: Neck and Bridge mini humbuckers, sold individually or as a calibrated set
Demo Videos
Coming Soon…
Live Videos
Coming Soon…
Tech Specs
“`html
| SPEC (B43H Juiced) | VALUE |
|---|---|
| Neck Ohm Reading: | ≈ 10.1 kΩ |
| Bridge Ohm Reading: | ≈ 11.8 kΩ |
| Polarity / Wind (Neck): | Slug Coil – North Up / Counter-Clockwise Screw Coil – South Up / Clockwise |
| Polarity / Wind (Bridge): | Slug Coil – North Up / Counter-Clockwise Screw Coil – South Up / Clockwise |
| Magnet Type: | Alnico V Bar |
| Wire Type: | 43 AWG Plain-Enamel |
| Pot Value (Recommended): | 500 kΩ Volume / Tone |
| Tone Cap Value: | 0.022 µF (Standard Humbucker Roll-Off) |
Additional Technical Info
1. Ohm readings may vary slightly due to temperature, multimeter calibration, and material variances.
2. Tone caps for humbuckers typically range from 0.022 µF to 0.015 µF. Larger values roll off more highs; smaller values retain more top-end clarity.
3. Recommendation: 0.022 µF for a balanced, clear humbucker response.
4. Wax potted for stability and feedback resistance.
Reviews
Dimensions
Wiring Diagrams
4-Conductor Wiring
The Story
Built From the Same Roots. Pushed Further.
The B43H Juiced takes the BTone® humbucker voice in a hotter, more aggressive direction.
The foundation still comes from the same philosophy that shaped BTone from the beginning — clarity, balance, response, and touch. But the B43H Juiced is built for players who want more push, more midrange presence, and more authority from a humbucker without losing definition.
Using 43 AWG plain-enamel wire, Alnico V magnets, and calibrated neck and bridge winds, the Juiced set delivers a stronger, tighter response while keeping chords clear and lead lines expressive.
It is not about chasing output for the sake of output. It is about adding more drive, more punch, and more energy while keeping the pickup musical.
Same attention to feel. Same focus on balance.
More output. More attitude.
Built by hand. Played with purpose.
The B43H Juiced is the BTone® humbucker voice turned up.
| Weight | .35 kg |
|---|---|
| Dimensions | 13 × 13 × 8 cm |
| Pickups | Set of 2 (Neck & Bridge), Neck Pickup Only, Bridge Pickup Only |
| Spacing | 50mm, (50mm Neck, 50mm Bridge) |
| Lead Type | Braided Shield, 4-Conductor Shielded |
| Cover | Chrome, Closed Chrome, Closed Gold, Gold |
Related products
-
B94H Classic
USD 150.00 USD 300.00Price range: USD 150.00 through USD 300.00 Select options This product has multiple variants. The options may be chosen on the product page -
B76S Bloom
USD 100.00 USD 300.00Price range: USD 100.00 through USD 300.00 Select options This product has multiple variants. The options may be chosen on the product page -
B43H Juiced
USD 150.00 USD 300.00Price range: USD 150.00 through USD 300.00 Select options This product has multiple variants. The options may be chosen on the product page -
B94T Classic
USD 125.00 USD 255.00Price range: USD 125.00 through USD 255.00 Select options This product has multiple variants. The options may be chosen on the product page
Why Buy From Us
Hands-On Service
Direct, knowledgeable support from people who actually build and understand your pickups.
Lifetime Warranty
Every BTone pickup is covered for life against workmanship and build-related issues.
Tone Vault Exchange
If your taste changes, swap pickups through the Tone Vault instead of starting from scratch.
Satisfaction Commitment
If something isn’t right, we’ll work with you directly to make it right.